1650-A
Automated 4-Knife Trimmer
High Speed In-Line Trimming System
Provides accurate 4-sided trimming at full press speeds!
(2) NEW units
available at 25% under wholesale
Save over $28,000 per unit!
Features and Specifications
 1.
Touch Screen Control PanelNew touch screen technology reduces make-ready to mere seconds. PLC Panel stores settings for frequently run jobs. Push a few buttons and you get the same great trim you had the last time you ran the job. |
|
 2.
Main ScreenIntuitive controls and options buttons lead you through the set-up procedure with unprecedented ease. Minor adjustments can be made manually or via the PLC "on the fly". |
|
 3.
Fine Jogging AssemblyMaintains product alignment for accurate trimming. Product size and jogging intensity are easily adjusted to enhance trim accuracy at varying press speeds. |
|
 4.
Hold-Down SkisAdjustable for varying product thickness, hold-down skis help maintain the proper shingle while jogging so product enters the knife bank perfectly aligned. |
|
 5.
Belt Pressure AdjustmentAllows operator to quickly and safely adjust belt pressure at varying press speeds to ensure accurate trimming while eliminating belt marks. Also has manual controls for "on the fly" adjustments. |
|
 6.
Heavy Duty Rotary KnivesSerrated 7" upper knives increase product thickness capabilities and extend knife life. Spindle mounted knives allow blade changes to be made within minutes. |
|
 7.
Swing-Up Belt Carriage AssembliesRock-Built's swing-up belt carriage assemblies provide safe and easy access to even the bottom knife (anvil) for quick replacement. |
|
 8.
90° Bump-Turn
ConveyorClean and simple, without cumbersome guides and adjustments, the proven UNI-TRIM Bump-Turn accurately changes product directionfor trimming of up to all four side of your product. |
|
 9.
Control Panel Skew AdjustmentNew touch screen technology means skew compensation can be accomplished at the touch of a button. No more bending over and turning handles. |
|
 10.
Torque, Torque, and more TorqueAt the heart of every UNI-TRIM are two 15:1 ratio heavy duty gear motors in each knife bank that provide 30 horsepower of torque to handle your toughest jobs. |
Specifications
Minimum Trim Size
5.5" wide - spine to face
5.5" high - head to foot
Maximum Trim Size
20" wide - spine to face
20" high - head to foot
Trimming Speeds* (Based on newsprint, 8.5" x 11"
product)
Up to 80,000 Issues per Hour @ 32 pages or less
Up to 60,000 Issues per Hour @ 32-48 pages
Up to 50,000 Issues per Hour @ 54-64 pages
Up to 40,000 Issues per Hour @68-80 pages
Up to 30,000 Issues per Hour @ 84-96 pages
*Speed varies with page count and paper weight.
Electrical Requirements
480 VAC, 20 Amp, 3 Phase
Air Requirements
30 PSI @ .5 CFM
Vacuum Requirements
Four 2,500 CFM Trim Removal Tubes
EconoPress Systems, Inc.
260 Crandon Boulevard, Suite 32-120
Miami, Florida 33149 USA
http://www.econopress-systems.com
info@econopress-systems.com
305-361-9372 tel
305-361-7292 fax
